Page 11 - general-partitions-product-guide
P. 11
SPECIFICATIONS
POWDER COATED STEEL be supplied by others) with standard 3/8” threaded rod, hex 50 Series—Pilasters—Shall be 3/4” (1” available) thick solid
Scope—All powder coated toilet partitions shall be (indicate one or nuts and washers to provide vertical adjustment and necessary phenolic core material. Same construction as doors and panels.
more style numbers as required) 30, floor supported; 40, floor sup- strength. Pilasters to be anchored to overhead member (which member is
ported with headrail; 50, ceiling hung; 60, floor to ceiling; as manu- 60 Series—Pilasters—shall be 1 1/4” thick with 2 sheets of stain- to be supplied by others) with standard 3/8” threaded rod, hex
factured by General Partitions Mfg. Corp., Erie, Pennsylvania. less steel, bonded before attaching die drawn molding to sides. nuts, and washers to provide vertical adjustment and necessary
Panel—Double-Wall Construction—Shall be 1” thick with two Same construction as panel. Pilasters are to be anchored to floor strength.
sheets of galvanized and bonderized steel bonded together and ceiling with heavy gauge angle. 60 Series—Pilasters—Shall be 3/4” (1” available) thick solid
before attaching die drawn molding on all four sides of panels. Hardware—Concealed latch (No. 2000D), coat hook (No. phenolic core material. Same construction as doors and panels
Mitered reinforcements fused to corners for added structural 6200D), hinge brackets (No. 1250D), and door stop keeper (No. Pilasters are to be anchored to floor and ceiling with heavy gauge
strength. Filler shall be General’s Ribcore sound-deadening in- 2060D) heavy cast non-ferrous alloy, chrome-plated. Concealed angle.
sulation. hinge (No. 1000D), works on opposing nylon cams under spring Hardware—Surface Mounted Aluminum Slide Latch (No.
Doors—To be same construction as panels with galvanized and tension. Top pivot pin, mounted within door having bearing points 2000AL), Coat Hook (No. 6200D), Aluminum Wrap Around Hinge
bonderized steel. above and below hinge bracket. Assembly (No. 1500AL) and Aluminum Door Stop & Keeper (No.
30 Series—Pilasters—Shall be 1-1/4” thick with two sheets of lev- Fittings—Wall connection brackets for panels and pilasters to be 2060AL).
el galvanized and bonderized steel, bonded before attaching die high strength heavy chrome plated. Pilaster trim to be 3” high. Fittings—Wall connection brackets for panels and pilasters to be
drawn molding to sides and top, mitered reinforcements fused .031 stainless steel. All hardware and fittings to be secured with high strength heavy chrome plated. Pilaster trim to be 3” high.
on both corners for added structural strength. Same construction vandal-proof sex bolts or No. 14 screws of proper lengths. .031 stainless steel. All hardware and fittings to be secured with
as panel. Pilasters are to be anchored to floor with standard 3/8” SHOWER CABINET vandal-proof sex bolts or No. 14 screws of proper lengths.
threaded rod, hex nuts and washer to provide vertical adjustment Double-Wall—Stainless Steel series—All shower cabinets shall SHOWER CABINET
and necessary strength. be double-wall stainless steel with pre-cast terrazzo receptor All shower cabinets shall be solid phenolic walls with pre-cast ter-
40 Series—Pilasters—Shall be 1-1/4” thick with two sheets of as manufactured by General Partitions Mfg. Corp., Erie, Penn- razzo receptor as manufactured by General Partitions Mfg. Corp.,
galvanized and bonderized steel, bonded before attaching die sylvania. Erie, Pennsylvania.
drawn molding to sides. Same construction as panel. Pilasters Walls—Shall be 1” thick with two sheets of stainless steel welded Walls—Shall be 1/2” thick solid phenolic (3/4” or 1” thickness also
are to be anchored to floor with heavy gauge angle. Top of pilas- together before attaching die drawn stainless steel molding on all available).
ters to be securely braced with extruded aluminum headrail with sides of panels. Filler to be General’s Ribcore sound-deadening Receptors—Black and white terrazzo. Sizes 32” x 32”, 36” x 36”,
integral crown loafer rail. insulation. 40” x 40” Neo-corner or 40” x 48” and 40” x 40” handicapped.
Headrail—To be integral crown loafer rail, extruded aluminum Receptors—Black and white terrazzo. Sizes 32” x 32”, 36” x 36”, Fittings—Brass drain with stainless steel strainer.
heat-treated and anodized with necessary fittings. 40” x 40” Neo-corner or 40” x 48” and 40” x 40” Handicapped. Options—Shower walls may be prepared at factory to receive
50 Series—Pilasters—Shall be 1-1/4” thick with two sheets of Fittings—Brass drain with stainless steel strainer. shower head and valve supplied by others. Curtains, valves,
galvanized and bonderized steel, bonded before attaching die Options—Shower walls may be prepared at factory to receive heads, arms and soap dishes are available as optional extras.
drawn molding to sides and end, mitered reinforcements fused shower head and valve supplied by others. Curtains, valves, H.D.P. (HIGH DENSITY POLYMER)
on both corners for added structural strength. Same construc- heads, arms and soap dishes are available as optional extras. Scope—All H.D.P. (High Density Polymer) toilet partitions shall
tion as panel. Pilasters are to be anchored to overhead member PLASTIC LAMINATES HIGH PRESSURE be 40 series, floor supported with headrail; 60, floor to ceiling;
(which member is to be supplied by others) with standard 3/8” Scope—All plastic laminate high pressure toilet partitions shall be as manufactured by General Partitions Mfg. Corp., Erie, Penn-
threaded rod, hex nuts and washers to provide vertical adjust- (indicate one or more style numbers as required) 30, floor sup- sylvania.
ment and necessary strength. ported; 40, floor supported with headrail; 50, ceiling hung; 60, Doors and Panels—Shall be 1” nominal thick (55” high) solid
60 Series—Pilasters—shall be 1-1/4” thick with 2 sheets of galva- floor to ceiling; as manufactured by General Partitions Mfg. Corp., high density polyethylene formed under pressure. Solid color
nized and bonderized steel, bonded before attaching die drawn Erie, Pennsylvania. throughout. All edges to be machined radius and all sharp edges
molding to sides. Same construction as panel. Pilasters are to be Doors and Panels—Shall be 1” thick with faces and edging 1/16” removed.
anchored to floor and ceiling with heavy gauge angle. general purpose laminated plastic. Bonded under pressure to a 40 Series—Pilasters – Shall be same construction as doors and
Hardware—Concealed latch (No. 2000D), coat hook (No. solid 45 lb. density particle board core assuring a rigid perma- panels. Pilasters are to be anchored to the floor with heavy gauge
6200D), hinge brackets (No. 1250D), and door stop and keeper nent bond. angle. Top of pilasters to be securely braced with extruded alumi-
(No. 2060D) heavy cast nonferrous alloy, chrome-plated. Con- 30 Series—Pilasters—Shall be 1 1/4” thick with faces and edging num headrail with integral crown loafer rail.
cealed hinge (No. 1000D), works on opposing nylon cams under 1/16” general purpose laminated plastic. Same construction as Headrail—To be integral crown loafer rail, extruded aluminum
spring tension. Top pivot pin, mounted within door having bear- panel. Pilasters are to be anchored to the floor with standard 3/8” heat-treated and anodized with necessary fittings.
ing points above and below hinge bracket. threaded rod, hex nuts and washers to provide vertical adjust- 60 Series—Pilasters—Shall be same construction as doors and
Fittings—Wall connection brackets for panels and pilasters to be ment and necessary strength. panels. Pilasters are to be anchored to floor and ceiling with
high strength heavy chrome plated. Pilaster trim to be 3” high, 40 Series—Pilasters—Shall be 1 1/4” thick with faces and edging heavy gauge angle.
.031 stainless steel. All hardware and fittings to be secured with 1/16” general purpose laminated plastic. Same construction as Hardware—Surface Mounted Aluminum Slide Latch (No.
vandal-proof sex bolts or No. 14 screws of proper lengths. panel. Pilasters are to be anchored to the floor with heavy gauge 2000AL), Coat Hook (No. 6200D), Aluminum Wrap Around Hinge
SHOWER CABINET angle. Top of pilasters to be securely braced with extruded alu- Assembly (No. 1500AL) and Aluminum Door Stop & Keeper (No.
Double-Wall—Powder Coated Steel Scope—All shower cabinets minum headrail with integral crown loafer rail. 2060AL).
shall be double-wall powder coated steel with pre-cast terrazzo Headrail—To be integral crown loafer rail, extruded aluminum Fittings—Panels anchored to pilasters with a continuous “U”
receptor as manufactured by General Partitions Mfg. Corp., Erie, heat-treated and anodized with necessary fittings. bracket. Panels and pilasters are anchored to the wall with con-
Pennsylvania. 50 Series—Pilasters—Shall be 1 1/4” thick with faces and edging tinuous brackets. Pilaster trim to be 3” high. All hardware and fit-
Walls—Shall be 1” thick with two sheets of level, hot-dipped gal- 1/16” general purpose laminated plastic. Same construction as tings to be secured with vandal-proof sex bolts or No. 14 screws
vanized and bonderized steel formed and bonded together be- panel. Pilasters are to be anchored to overhead member (which of proper length.
fore attaching die drawn molding on all sides of panels. Filler to member is to be supplied by others) with standard 3/8” threaded SHOWER CABINET
be General’s Ribcore sound-deadening insulation. rod, hex nuts, and washers to provide vertical adjustment and All shower cabinets shall be high density polymer walls with pre-
Receptors—Black and white terrazzo. Sizes 32” x 32”, 36” x 36”, necessary strength. cast terrazzo receptor as manufactured by General Partitions
40” x 40” Neo-corner or 40” x 48” and 40” x 40” Handicapped. 60 Series—Pilasters—shall be 1 1/4” thick with faces and edging Mfg. Corp., Erie, Pennsylvania.
Fittings—Brass drain with stainless steel strainer. 1/16” general purpose laminated plastic. Same construction as Walls—Shall be 1” thick high density polymer.
Options—Shower walls may be prepared at factory to receive doors and panels Pilasters are to be anchored to floor and ceiling Receptors—Black and white terrazzo sizes 32” x 32”, 36” x 36”,
shower head and valve supplied by others. Curtains, valves, with heavy gauge angle. 40” x 40” Neo-corner or 40” x 48” and 40” x 40” handicapped.
heads, arms and soap dishes are available as optional extras. Hardware—Concealed latch (No. 2000CPL), coat hook (No. Fittings—Brass drain with stainless steel strainer.
STAINLESS STEEL 6200D), hinge brackets (No. 1250PL), and door stop keeper (No. Options—Shower walls may be prepared at factory to receive
Scope—All stainless steel toilet partitions shall be (indicate one 2060C-PL) heavy cast non-ferrous alloy, chrome-plated. Con- shower head and valve supplied by others. Curtains, valves,
or more style numbers as required) 30, floor supported; 40, floor cealed hinge (No. 1000PL), works on opposing nylon cams. Top heads, arms and soap dishes are available as optional extras.
supported with headrail; 50, ceiling hung; 60, floor to ceiling: as pivot pin, mounted within door having bearing points above and F.R.P. FIBERGLASS REINFORCED PLASTIC
manufactured by General Partitions Mfg. Corp., Erie, Pennsylva- below hinge bracket. Scope—All F.R.P. Fiberglass reinforced plastic shall be (indicate
nia. Fittings—Wall connection brackets for panels and pilasters to be one or more style numbers as required) 40,Floor supported with
Panel—Double-Wall Construction—Shall be 1” thick with two high strength heavy chrome plated. Pilaster trim to be 3” high. headrail as manufactured by General Partitions Mfg. Corp., Erie,
sheets of Stainless Steel, bonded together before attaching die .031 stainless steel. All hardware and fittings to be secured with Pennsylvania.
drawn stainless steel molding on all four sides of panels. Mitered vandal-proof sex bolts or No. 14 screws of proper lengths. Doors and Panels—shall be textured fiberglass reinforced plastic
stainless steel reinforcements fused to corners for added struc- S.P.C. (SOLID PHENOLIC CORE) bonded under pressure to a treated wood core.
tural strength. Filler shall be General’s Ribcore sound-deadening Scope—All S.P.C. (Solid Phenolic Core) toilet partitions shall be 40 Series—Pilasters shall be same construction as doors and
insulation. 30 series, floor supported; 40, floor supported with headrail; 50, panels. Pilaster are to be anchored to floor with heavy gauge
Doors—To be same construction as panels with Stainless Steel. ceiling hung; 60, floor to ceiling; as manufactured by General stainless steel angle. Top of pilaster to be securely braced with
30 Series—Pilasters—Shall be 1 1/4” thick with two sheets of Partitions Mfg. Corp., Erie, Pennsylvania. extruded aluminum headrail with integral crown loafer rail.
Stainless Steel, bonded before attaching die drawn molding to Doors—Shall be manufactured of solid phenolic core material Headrail —to be integral crown loafter rail, extruded aluminum
sides and top, mitered reinforcements fused to both corners for 3/4” thick with high pressure matte finish melamine surfaces. heat-treated and anodized with necessary fittings.
added structural strength. same construction as panel. Pilasters Edges shall be black. Hardware—Surface Mounted Aluminum Slide Latch (No. 2000
are to be anchored to floor with standard 3/8” threaded rod, hex Panels—Shall be same construction as doors—1/2” thick. AL) Coat Hook (No. 6200D) Aluminum Wrap Around Hinge As-
nuts and washers to provide vertical adjustment and necessary 30 Series—Pilasters—shall be 3/4” (1” available) thick solid phe- sembly (No. 1500 AL) and Aluminum Door Stop & Keeper (No.
strength. nolic core material. Same construction as doors and panels. Pi- 2060 AL).
40 Series—Pilasters—Shall be 1 1/4” thick with two sheets of lasters are to be anchored to floor with standard 3/8” threaded Fittings—Wall connection brackets for panels and pilaster to be
Stainless Steel, bonded before attaching die drawn stainless rod, hex nuts and washers to provide vertical adjustment and double high, aluminum stirrup brackets. Pilaster trim to be 3”
steel molding to sides. Same construction as panel. Pilasters are necessary strength. high. All hardware and fittings to be secured with vandal proof
to be anchored to floor with heavy-gauge angle. Top of pilasters 40 Series—Pilasters—Shall be 3/4” (1” available) thick solid sex bolts or No. 14 screws of proper length.
to be securely braced with extruded aluminum headrail with inte- phenolic core material. Same construction as doors and panels.
gral crown loafer rail. Pilasters are to be anchored to the floor with heavy gauge angle.
Headrail—To be integral crown loafer rail, extruded aluminum Top of pilasters to be securely braced with extruded aluminum
heat-treated and anodized with necessary fittings. headrail with integral crown loafer rail.
50 Series—Pilasters—Shall be 1 1/4” thick with two sheets of Headrail—To be with integral crown loafer rail, extruded alumi-
Stainless Steel, bonded before attaching die drawn molding to num heat-treated and anodized with necessary fittings.
sides and end, mitered reinforcements fused on both corners for
added structural strength. Same construction as panel. Pilasters
are to be anchored to overhead member (which member is to
Check with your dealer about availability of other sizes. For complete information on Toilet Partitions contact your authorized dealer. Product Guide 11
POWDER COATED STEEL be supplied by others) with standard 3/8” threaded rod, hex 50 Series—Pilasters—Shall be 3/4” (1” available) thick solid
Scope—All powder coated toilet partitions shall be (indicate one or nuts and washers to provide vertical adjustment and necessary phenolic core material. Same construction as doors and panels.
more style numbers as required) 30, floor supported; 40, floor sup- strength. Pilasters to be anchored to overhead member (which member is
ported with headrail; 50, ceiling hung; 60, floor to ceiling; as manu- 60 Series—Pilasters—shall be 1 1/4” thick with 2 sheets of stain- to be supplied by others) with standard 3/8” threaded rod, hex
factured by General Partitions Mfg. Corp., Erie, Pennsylvania. less steel, bonded before attaching die drawn molding to sides. nuts, and washers to provide vertical adjustment and necessary
Panel—Double-Wall Construction—Shall be 1” thick with two Same construction as panel. Pilasters are to be anchored to floor strength.
sheets of galvanized and bonderized steel bonded together and ceiling with heavy gauge angle. 60 Series—Pilasters—Shall be 3/4” (1” available) thick solid
before attaching die drawn molding on all four sides of panels. Hardware—Concealed latch (No. 2000D), coat hook (No. phenolic core material. Same construction as doors and panels
Mitered reinforcements fused to corners for added structural 6200D), hinge brackets (No. 1250D), and door stop keeper (No. Pilasters are to be anchored to floor and ceiling with heavy gauge
strength. Filler shall be General’s Ribcore sound-deadening in- 2060D) heavy cast non-ferrous alloy, chrome-plated. Concealed angle.
sulation. hinge (No. 1000D), works on opposing nylon cams under spring Hardware—Surface Mounted Aluminum Slide Latch (No.
Doors—To be same construction as panels with galvanized and tension. Top pivot pin, mounted within door having bearing points 2000AL), Coat Hook (No. 6200D), Aluminum Wrap Around Hinge
bonderized steel. above and below hinge bracket. Assembly (No. 1500AL) and Aluminum Door Stop & Keeper (No.
30 Series—Pilasters—Shall be 1-1/4” thick with two sheets of lev- Fittings—Wall connection brackets for panels and pilasters to be 2060AL).
el galvanized and bonderized steel, bonded before attaching die high strength heavy chrome plated. Pilaster trim to be 3” high. Fittings—Wall connection brackets for panels and pilasters to be
drawn molding to sides and top, mitered reinforcements fused .031 stainless steel. All hardware and fittings to be secured with high strength heavy chrome plated. Pilaster trim to be 3” high.
on both corners for added structural strength. Same construction vandal-proof sex bolts or No. 14 screws of proper lengths. .031 stainless steel. All hardware and fittings to be secured with
as panel. Pilasters are to be anchored to floor with standard 3/8” SHOWER CABINET vandal-proof sex bolts or No. 14 screws of proper lengths.
threaded rod, hex nuts and washer to provide vertical adjustment Double-Wall—Stainless Steel series—All shower cabinets shall SHOWER CABINET
and necessary strength. be double-wall stainless steel with pre-cast terrazzo receptor All shower cabinets shall be solid phenolic walls with pre-cast ter-
40 Series—Pilasters—Shall be 1-1/4” thick with two sheets of as manufactured by General Partitions Mfg. Corp., Erie, Penn- razzo receptor as manufactured by General Partitions Mfg. Corp.,
galvanized and bonderized steel, bonded before attaching die sylvania. Erie, Pennsylvania.
drawn molding to sides. Same construction as panel. Pilasters Walls—Shall be 1” thick with two sheets of stainless steel welded Walls—Shall be 1/2” thick solid phenolic (3/4” or 1” thickness also
are to be anchored to floor with heavy gauge angle. Top of pilas- together before attaching die drawn stainless steel molding on all available).
ters to be securely braced with extruded aluminum headrail with sides of panels. Filler to be General’s Ribcore sound-deadening Receptors—Black and white terrazzo. Sizes 32” x 32”, 36” x 36”,
integral crown loafer rail. insulation. 40” x 40” Neo-corner or 40” x 48” and 40” x 40” handicapped.
Headrail—To be integral crown loafer rail, extruded aluminum Receptors—Black and white terrazzo. Sizes 32” x 32”, 36” x 36”, Fittings—Brass drain with stainless steel strainer.
heat-treated and anodized with necessary fittings. 40” x 40” Neo-corner or 40” x 48” and 40” x 40” Handicapped. Options—Shower walls may be prepared at factory to receive
50 Series—Pilasters—Shall be 1-1/4” thick with two sheets of Fittings—Brass drain with stainless steel strainer. shower head and valve supplied by others. Curtains, valves,
galvanized and bonderized steel, bonded before attaching die Options—Shower walls may be prepared at factory to receive heads, arms and soap dishes are available as optional extras.
drawn molding to sides and end, mitered reinforcements fused shower head and valve supplied by others. Curtains, valves, H.D.P. (HIGH DENSITY POLYMER)
on both corners for added structural strength. Same construc- heads, arms and soap dishes are available as optional extras. Scope—All H.D.P. (High Density Polymer) toilet partitions shall
tion as panel. Pilasters are to be anchored to overhead member PLASTIC LAMINATES HIGH PRESSURE be 40 series, floor supported with headrail; 60, floor to ceiling;
(which member is to be supplied by others) with standard 3/8” Scope—All plastic laminate high pressure toilet partitions shall be as manufactured by General Partitions Mfg. Corp., Erie, Penn-
threaded rod, hex nuts and washers to provide vertical adjust- (indicate one or more style numbers as required) 30, floor sup- sylvania.
ment and necessary strength. ported; 40, floor supported with headrail; 50, ceiling hung; 60, Doors and Panels—Shall be 1” nominal thick (55” high) solid
60 Series—Pilasters—shall be 1-1/4” thick with 2 sheets of galva- floor to ceiling; as manufactured by General Partitions Mfg. Corp., high density polyethylene formed under pressure. Solid color
nized and bonderized steel, bonded before attaching die drawn Erie, Pennsylvania. throughout. All edges to be machined radius and all sharp edges
molding to sides. Same construction as panel. Pilasters are to be Doors and Panels—Shall be 1” thick with faces and edging 1/16” removed.
anchored to floor and ceiling with heavy gauge angle. general purpose laminated plastic. Bonded under pressure to a 40 Series—Pilasters – Shall be same construction as doors and
Hardware—Concealed latch (No. 2000D), coat hook (No. solid 45 lb. density particle board core assuring a rigid perma- panels. Pilasters are to be anchored to the floor with heavy gauge
6200D), hinge brackets (No. 1250D), and door stop and keeper nent bond. angle. Top of pilasters to be securely braced with extruded alumi-
(No. 2060D) heavy cast nonferrous alloy, chrome-plated. Con- 30 Series—Pilasters—Shall be 1 1/4” thick with faces and edging num headrail with integral crown loafer rail.
cealed hinge (No. 1000D), works on opposing nylon cams under 1/16” general purpose laminated plastic. Same construction as Headrail—To be integral crown loafer rail, extruded aluminum
spring tension. Top pivot pin, mounted within door having bear- panel. Pilasters are to be anchored to the floor with standard 3/8” heat-treated and anodized with necessary fittings.
ing points above and below hinge bracket. threaded rod, hex nuts and washers to provide vertical adjust- 60 Series—Pilasters—Shall be same construction as doors and
Fittings—Wall connection brackets for panels and pilasters to be ment and necessary strength. panels. Pilasters are to be anchored to floor and ceiling with
high strength heavy chrome plated. Pilaster trim to be 3” high, 40 Series—Pilasters—Shall be 1 1/4” thick with faces and edging heavy gauge angle.
.031 stainless steel. All hardware and fittings to be secured with 1/16” general purpose laminated plastic. Same construction as Hardware—Surface Mounted Aluminum Slide Latch (No.
vandal-proof sex bolts or No. 14 screws of proper lengths. panel. Pilasters are to be anchored to the floor with heavy gauge 2000AL), Coat Hook (No. 6200D), Aluminum Wrap Around Hinge
SHOWER CABINET angle. Top of pilasters to be securely braced with extruded alu- Assembly (No. 1500AL) and Aluminum Door Stop & Keeper (No.
Double-Wall—Powder Coated Steel Scope—All shower cabinets minum headrail with integral crown loafer rail. 2060AL).
shall be double-wall powder coated steel with pre-cast terrazzo Headrail—To be integral crown loafer rail, extruded aluminum Fittings—Panels anchored to pilasters with a continuous “U”
receptor as manufactured by General Partitions Mfg. Corp., Erie, heat-treated and anodized with necessary fittings. bracket. Panels and pilasters are anchored to the wall with con-
Pennsylvania. 50 Series—Pilasters—Shall be 1 1/4” thick with faces and edging tinuous brackets. Pilaster trim to be 3” high. All hardware and fit-
Walls—Shall be 1” thick with two sheets of level, hot-dipped gal- 1/16” general purpose laminated plastic. Same construction as tings to be secured with vandal-proof sex bolts or No. 14 screws
vanized and bonderized steel formed and bonded together be- panel. Pilasters are to be anchored to overhead member (which of proper length.
fore attaching die drawn molding on all sides of panels. Filler to member is to be supplied by others) with standard 3/8” threaded SHOWER CABINET
be General’s Ribcore sound-deadening insulation. rod, hex nuts, and washers to provide vertical adjustment and All shower cabinets shall be high density polymer walls with pre-
Receptors—Black and white terrazzo. Sizes 32” x 32”, 36” x 36”, necessary strength. cast terrazzo receptor as manufactured by General Partitions
40” x 40” Neo-corner or 40” x 48” and 40” x 40” Handicapped. 60 Series—Pilasters—shall be 1 1/4” thick with faces and edging Mfg. Corp., Erie, Pennsylvania.
Fittings—Brass drain with stainless steel strainer. 1/16” general purpose laminated plastic. Same construction as Walls—Shall be 1” thick high density polymer.
Options—Shower walls may be prepared at factory to receive doors and panels Pilasters are to be anchored to floor and ceiling Receptors—Black and white terrazzo sizes 32” x 32”, 36” x 36”,
shower head and valve supplied by others. Curtains, valves, with heavy gauge angle. 40” x 40” Neo-corner or 40” x 48” and 40” x 40” handicapped.
heads, arms and soap dishes are available as optional extras. Hardware—Concealed latch (No. 2000CPL), coat hook (No. Fittings—Brass drain with stainless steel strainer.
STAINLESS STEEL 6200D), hinge brackets (No. 1250PL), and door stop keeper (No. Options—Shower walls may be prepared at factory to receive
Scope—All stainless steel toilet partitions shall be (indicate one 2060C-PL) heavy cast non-ferrous alloy, chrome-plated. Con- shower head and valve supplied by others. Curtains, valves,
or more style numbers as required) 30, floor supported; 40, floor cealed hinge (No. 1000PL), works on opposing nylon cams. Top heads, arms and soap dishes are available as optional extras.
supported with headrail; 50, ceiling hung; 60, floor to ceiling: as pivot pin, mounted within door having bearing points above and F.R.P. FIBERGLASS REINFORCED PLASTIC
manufactured by General Partitions Mfg. Corp., Erie, Pennsylva- below hinge bracket. Scope—All F.R.P. Fiberglass reinforced plastic shall be (indicate
nia. Fittings—Wall connection brackets for panels and pilasters to be one or more style numbers as required) 40,Floor supported with
Panel—Double-Wall Construction—Shall be 1” thick with two high strength heavy chrome plated. Pilaster trim to be 3” high. headrail as manufactured by General Partitions Mfg. Corp., Erie,
sheets of Stainless Steel, bonded together before attaching die .031 stainless steel. All hardware and fittings to be secured with Pennsylvania.
drawn stainless steel molding on all four sides of panels. Mitered vandal-proof sex bolts or No. 14 screws of proper lengths. Doors and Panels—shall be textured fiberglass reinforced plastic
stainless steel reinforcements fused to corners for added struc- S.P.C. (SOLID PHENOLIC CORE) bonded under pressure to a treated wood core.
tural strength. Filler shall be General’s Ribcore sound-deadening Scope—All S.P.C. (Solid Phenolic Core) toilet partitions shall be 40 Series—Pilasters shall be same construction as doors and
insulation. 30 series, floor supported; 40, floor supported with headrail; 50, panels. Pilaster are to be anchored to floor with heavy gauge
Doors—To be same construction as panels with Stainless Steel. ceiling hung; 60, floor to ceiling; as manufactured by General stainless steel angle. Top of pilaster to be securely braced with
30 Series—Pilasters—Shall be 1 1/4” thick with two sheets of Partitions Mfg. Corp., Erie, Pennsylvania. extruded aluminum headrail with integral crown loafer rail.
Stainless Steel, bonded before attaching die drawn molding to Doors—Shall be manufactured of solid phenolic core material Headrail —to be integral crown loafter rail, extruded aluminum
sides and top, mitered reinforcements fused to both corners for 3/4” thick with high pressure matte finish melamine surfaces. heat-treated and anodized with necessary fittings.
added structural strength. same construction as panel. Pilasters Edges shall be black. Hardware—Surface Mounted Aluminum Slide Latch (No. 2000
are to be anchored to floor with standard 3/8” threaded rod, hex Panels—Shall be same construction as doors—1/2” thick. AL) Coat Hook (No. 6200D) Aluminum Wrap Around Hinge As-
nuts and washers to provide vertical adjustment and necessary 30 Series—Pilasters—shall be 3/4” (1” available) thick solid phe- sembly (No. 1500 AL) and Aluminum Door Stop & Keeper (No.
strength. nolic core material. Same construction as doors and panels. Pi- 2060 AL).
40 Series—Pilasters—Shall be 1 1/4” thick with two sheets of lasters are to be anchored to floor with standard 3/8” threaded Fittings—Wall connection brackets for panels and pilaster to be
Stainless Steel, bonded before attaching die drawn stainless rod, hex nuts and washers to provide vertical adjustment and double high, aluminum stirrup brackets. Pilaster trim to be 3”
steel molding to sides. Same construction as panel. Pilasters are necessary strength. high. All hardware and fittings to be secured with vandal proof
to be anchored to floor with heavy-gauge angle. Top of pilasters 40 Series—Pilasters—Shall be 3/4” (1” available) thick solid sex bolts or No. 14 screws of proper length.
to be securely braced with extruded aluminum headrail with inte- phenolic core material. Same construction as doors and panels.
gral crown loafer rail. Pilasters are to be anchored to the floor with heavy gauge angle.
Headrail—To be integral crown loafer rail, extruded aluminum Top of pilasters to be securely braced with extruded aluminum
heat-treated and anodized with necessary fittings. headrail with integral crown loafer rail.
50 Series—Pilasters—Shall be 1 1/4” thick with two sheets of Headrail—To be with integral crown loafer rail, extruded alumi-
Stainless Steel, bonded before attaching die drawn molding to num heat-treated and anodized with necessary fittings.
sides and end, mitered reinforcements fused on both corners for
added structural strength. Same construction as panel. Pilasters
are to be anchored to overhead member (which member is to
Check with your dealer about availability of other sizes. For complete information on Toilet Partitions contact your authorized dealer. Product Guide 11
